Beads designed to give true corners and edges to plaster and render internally and externally for all conditions; finishing with good resistance to cracking, chipping and impact damage on corners and edges. Standard and security grade mesh products used as a key for plaster internally and render externally and can be fixed to brick / block work, timber, steel and concrete using various proprietary fixings to provide a smooth even finish where required.

Showing products: 1 - 9 of 31 Filter Products

GPTC Galvanised Perforated Thin Coat Bead

GPTC Galvanised Perforated Thin Coat Bead

A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

View Product

GMM Galvanised Mini Mesh Bead

GMM Galvanised Mini Mesh Bead

A thin coat bead with fine mesh wings designed for one coat plastering. Plaster depth 3mm. Fix with nails or plaster dabs. Use on plasterboard lined walls or aerated blocks. Internal use only.

View Product

GPTCLW Galvanised Perforated Thin Coat Bead Wide Wing

GPTCLW Galvanised Perforated Thin Coat Bead Wide Wing

As perforated thin coat bead as per page 3 above but with slightly wider wings to give a deeper plaster key. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

View Product

GEB Galvanised Plasterboard Edge Bead

GEB Galvanised Plasterboard Edge Bead

A bead to reinforce the edges of plasterboard which can be fixed on either with the perforated flange on the face of the board by nailing and skimmed over or with the short flange on the board face for a decorative edge finish. Internal use only.

View Product

GPS Galvanised Dry Wall Stop Bead

GPS  Galvanised Dry Wall Stop Bead

A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm Stop. Internal use only.

View Product

GAB Galvanised Angle Bead 45mm wing

GAB Galvanised Angle Bead 45mm wing

This traditional wet plaster bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by plaster dabs at approximately 600mm centres, push the wings into the dabs to allow for the required plaster depth-up to 13mm then ensure the nose is set square and plumb as required. Generally for internal use only.

View Product

GWAB Galvanised Wide Angle Bead 63mm wing

GWAB Galvanised Wide Angle Bead 63mm wing

As the galvanised angle bead above but with a wider wing to allow for more uneven corners and slightly deeper plaster-up to 16mm.

View Product

GPS Galvanised Plaster Stop Bead

GPS Galvanised Plaster Stop Bead

Provides a straight and clean edge to wet plaster where it butts up to other materials such as door and window frames. Fixed with plaster or mortar dabs as above or can be nailed. Generally for internal use only. Stainless Steel or PVC-u. Recommended for external use.

View Product

GERS Galvanised External Render Stop (Bell) Bead

GERS  Galvanised External Render Stop (Bell) Bead

Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or masonry nails. Although this is for external use we would generally recommend Stainless Steel or PVC-u for this application only using this product in sheltered or low rainfall areas.

View Product
Showing products: 1 - 9 of 31