SJH Standard Joist Hangers

BS6178:Part 1:1990(Min 2.8N/mm²) For supporting timber joists and structural composite timber from masonry walls. A non-welded construction to BS6178. Increased safe working loads, higher side flange and resists rotation.

Product name

Further information

Product name

"The back plate of the hanger should be flat against the supporting masonry. Before any loads are applied there should be at least 600mm of cured brick/block work above the hanger. The end of the joist should then be flush against the back of the hanger and side web holes filled with 30mm x 3.75mm square twist nails. The above hangers are also available with a return flange (RJH) and as a straddle or double hanger (STJH) which allows for positive location of the hangers in-situ and a straight joist line where required. When ordering these styles of built in joist hangers please clearly state the masonry or steel work size they are fitting over as they are generally made to order."

Hangers per Box
Timber Depth Timber Width
38mm 44mm 47mm 50mm 63mm 75mm 89mm 100mm 125mm 150mm
100mm 50 40 40 40 40 40 30 30 - -
125mm 45 40 40 40 40 30 30 20 15 -
150mm 40 40 40 40 40 25 25 20 15 15
175mm 30 30 30 30 30 20 20 20 15 10
200mm 25 25 25 25 25 20 20 15 15 10
225mm 25 25 25 25 25 20 20 15 10 10
250mm 25 25 25 25 25 15 15 15 10 10

Widths   Depths  
38mm 75mm 100mm 225mm
44mm 89mm 125mm 250mm
47mm 100mm 150mm  
50mm 125mm 175mm  
63mm 150mm 200mm  

All hangers 150mm deep and above are undersized by 10mm to allow for notching of ceiling joists for flush finishing of the plasterboard.