Showing products: 1 - 31 of 31
Filter Products

GPTC Galvanised Perforated Thin Coat Bead

GPTC Galvanised Perforated Thin Coat Bead

A thin coat board bead for plaster skimming on plasterboard lined walls. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

View product

GMM Galvanised Mini Mesh Bead

GMM Galvanised Mini Mesh Bead

A thin coat bead with fine mesh wings designed for one coat plastering. Plaster depth 3mm. Fix with nails or plaster dabs. Use on plasterboard lined walls or aerated blocks. Internal use only.

View product

GPTCLW Galvanised Perforated Thin Coat Bead Wide Wing

GPTCLW Galvanised Perforated Thin Coat Bead Wide Wing

As perforated thin coat bead as per page 3 above but with slightly wider wings to give a deeper plaster key. Plaster depth 2/3mm. Nail holes for easy fix with drywall nails. Scalloped edge for an excellent plaster key. Internal use only.

View product

GEB Galvanised Plasterboard Edge Bead

GEB Galvanised Plasterboard Edge Bead

A bead to reinforce the edges of plasterboard which can be fixed on either with the perforated flange on the face of the board by nailing and skimmed over or with the short flange on the board face for a decorative edge finish. Internal use only.

View product

GPS Galvanised Dry Wall Stop Bead

GPS Galvanised Dry Wall Stop Bead

A bead for protection of thin coat plaster at edges and reveals and for abutment of thin coat plaster against other wall finishes. Also sometimes used as an arch bead. Nail holes for easy fix with drywall nails. Rigid but light bead perforated for an excellent thin coat plaster key. Either 3mm or 6mm Stop. Internal use only.

View product

SAD Self Adhesive Tape

SAD Self Adhesive Tape

A quality self adhesive tape for plasterboard jointing and patching repairs on plasterboard.

View product

SBCT Flexible Steel Band Corner Tape

SBCT Flexible Steel Band Corner Tape

Manufactured by bonding two corrosion resistant metal strips to paper jointing tape, it is safe to use as there are no sharp edges compared to normal bead or mesh. Bead corner tape is designed for finishing inside and outside drywall corners. The flexible steel backing fits any angle where traditional beading cannot be used and can be easily cut to any length for minimum wastage. Application is by standard jointing compound, no special tools required.

View product

GAB Galvanised Angle Bead 45mm Wing

GAB Galvanised Angle Bead 45mm Wing

This traditional wet plaster bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by plaster dabs at approximately 600mm centres, push the wings into the dabs to allow for the required plaster depth-up to 13mm then ensure the nose is set square and plumb as required. Generally for internal use only.

View product

GWAB Galvanised Wide Angle Bead 63mm Wing

GWAB Galvanised Wide Angle Bead 63mm Wing

As the galvanised angle bead above but with a wider wing to allow for more uneven corners and slightly deeper plaster-up to 16mm.

View product

GPS Galvanised Plaster Stop Bead

GPS Galvanised Plaster Stop Bead

Provides a straight and clean edge to wet plaster where it butts up to other materials such as door and window frames. Fixed with plaster or mortar dabs as above or can be nailed. Generally for internal use only. Stainless Steel or PVC-u. Recommended for external use.

View product

GERS Galvanised External Render Stop (Bell) Bead

GERS Galvanised External Render Stop (Bell) Bead

Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or masonry nails. Although this is for external use we would generally recommend Stainless Steel or PVC-u for this application only using this product in sheltered or low rainfall areas.

View product

GMB Galvanised Movement Bead

GMB Galvanised Movement Bead

Designed to be used to form movement joints in plaster or render where long wall runs either have movement joints in situ or where there is a need to allow for differential or thermal movement. The bead consists of two plaster stop lengths joined by a white pvc extrusion which allows for up to 4mm of movement and which is covered by a vinyl tape which is removed after plastering or rendering. Internal use only. We recommend Stainless Steel or PVC-u for external rendering.

View product

GARB Galvanised Architrave Bead

GARB Galvanised Architrave Bead

A range of beads produced to allow for decorative finishes – i.e. shadow lines and recesses around door and window frames etc. The bead can either be supplied as an engaging bead or abutting bead with various plaster depths available. Internal use only.

View product

SAB Stainless Steel Angle Bead

SAB Stainless Steel Angle Bead

The traditional render corner bead provides a strong true corner or arris, with the mesh wings allowing for a good plaster key and resistance to cracking. Fixed by mortar dabs at approximately 600mm centres, push the wings into the dabs to allow for the required render depth-up to 13mm then ensure the nose is set square and plumb as required.

View product

SPS Stainless Steel Plaster Stop

SPS Stainless Steel Plaster Stop

Provides a straight and clean edge to render where it butts up to other materials such as door and window frames. Fixed with mortar dabs as above or can be nailed using stainless steel fixings.

View product

SERS Stainless Steel External Render (Bell) Bead

SERS Stainless Steel External Render (Bell) Bead

Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or stainless steel nails.

View product

SMB Stainless Steel Movement Bead

SMB Stainless Steel Movement Bead

Designed to be used to form movement joints in plaster or render where long wall runs either have movement joints in situ or where there is a need to allow for differential or thermal movement. The bead consists of two plaster stop lengths joined by a white pvc extrusion which allows for up to 4mm of movement and which is covered by a vinyl tape which is removed after plastering or rendering.

View product

PAB 23 PVC-u Angle Bead Thincoat

PAB 23 PVC-u Angle Bead Thincoat

A PVC-u equivalent to a mini mesh or perforated thin coat bead for use with plasterboard where a skim coat is required. Fixed using drywall nails or jointing filler the profile allows for a 2mm to 3mm plaster coat to provide a neat corner edge. Internal use only.

View product

PAB PVC-u Angle Bead

PAB PVC-u Angle Bead

A PVC-u equivalent to traditional plaster and render corner beads. The wing provides a good plaster or mortar key and the bead nose lengthens through the range to allow for increasing depths of plaster or mortar. Fixed with either plaster or mortar dabs or nails these beads can be used internally or externally.

View product

PPS3 PCV-u Arch Bead

PPS3 PCV-u Arch Bead

A flexible bead allowing the plasterer to form a dry wall corner arch to the radius of his choice. The nose allows for 3mm of plaster skim and forms a stop for the plaster. For use internally the bead can be fixed by nailing, jointing filler or adhesive to plasterboard.

View product

PPS PVC-u Plaster Stop Bead

PPS PVC-u Plaster Stop Bead

Used in the same way as a steel plaster stop this bead comes in four flange widths for use with either plaster or external render. Fixing by nailing or plaster/mortar dabs the bead provides a straight edge to separate plaster or mortar from other materials. Internal and external use.

View product

PERS External Render Stop (Bell) Bead

PERS External Render Stop (Bell) Bead

For use with external render to provide a drip feature at the bottom of the render coat. Fixed using either mortar dabs or masonry nails the bead forms a straight edge to the bottom of the render.

View product

PMB PVC-u Movement Bead

PMB PVC-u Movement Bead

Designed to form a movement joint where needed in a long run of plastered or rendered masonry where there is a movement joint or to allow for thermal or differential movement in a long run of plaster or render. The bead consists of two plaster stop beads joined with a white extrusion allowing for approximately 4mm of movement when installed vertically. Internal and external use.

View product

GEML Galvanised Expanded Metal Lath

GEML Galvanised Expanded Metal Lath

A key for plaster on suspended ceilings and walls this versatile product can also be used to encase steel columns and beams to assist in fire protection. Use internally, fixed with galvanised nails, staples or tying wire.

View product

SEML Stainless Steel Expanded Metal Lath

SEML Stainless Steel Expanded Metal Lath

A key for render work externally or for plaster work internally where damp conditions prevail. Fix with stainless steel nails, staples or wire or alternatively proprietary polypropylene anchors to masonry or concrete.

View product

GRL Galvanised Rib-Lath

GRL Galvanised Rib-Lath

A key for plastering and rendering rib-lath with its stiffening ribs provides a good key for deeper coatings of plaster or render. As well as being used for walls rib-lath can also be used for partitions and ceilings. Fixed through the rib section with galvanised nails or around the rib with galvanised staples or tying wire.

View product

SRL Stainless Steel Rib-Lath

SRL Stainless Steel Rib-Lath

A key for plastering and rendering rib-lath with its stiffening ribs provides a good key for deeper coatings of plaster or render. As well as being used for walls rib-lath can also be used for partitions and ceilings. Fixed through the rib section with Stainless Steel nails or around the rib with stainless steel staples or tying wire. External use only.

View product

SCA Semi Circular Arch Former

SCA Semi Circular Arch Former

A mesh former allowing the plasterer to produce a clean edged semi-circular arch opening. The arches are supplied as a pack of four pieces and are fixed to each side of the opening then plastered over. An elliptical shape can be produced by using extra bridging pieces supplied as a separate pack. Recommended for internal use only. 1 box contains enough for 1 full arch i.e. 4 pieces.

View product

SLLD Security Lath Light Duty

SLLD Security Lath Light Duty

This light duty Security Lath is a lightweight and economical security lath suitable for internal wall security, partitions, ceilings and roofs. Each sheet weighs approximately 6kgs and can easily be handled by one person.

View product

SLHDR Security Lath Heavy Duty Raised

SLHDR Security Lath Heavy Duty Raised

This heavy duty raised Security Lath is ideal for internal or external brickwork and can act as a key for render or plaster finishes when galvanised.

View product

SLHD Security Lath Heavy Duty

SLHD Security Lath Heavy Duty

This heavy duty Security Lath is suitable for internal wall security, partitions, ceilings and roofs. The mesh has a flattened profile and weighs approximately 20kgs per sheet.

View product
Showing products: 1 - 31 of 31
Filter Products