A PVC-u equivalent to traditional plaster and render corner beads. The wing provides a good plaster or mortar key and the bead nose lengthens through the range to allow for increasing depths of plaster or mortar. Fixed with either plaster or mortar dabs or nails these beads can be used internally or externally.
A flexible bead allowing the plasterer to form a dry wall corner arch to the radius of his choice. The nose allows for 3mm of plaster skim and forms a stop for the plaster. For use internally the bead can be fixed by nailing, jointing filler or adhesive to plasterboard.
Used in the same way as a steel plaster stop this bead comes in four flange widths for use with either plaster or external render. Fixing by nailing or plaster/mortar dabs the bead provides a straight edge to separate plaster or mortar from other materials. Internal and external use.
Designed to form a movement joint where needed in a long run of plastered or rendered masonry where there is a movement joint or to allow for thermal or differential movement in a long run of plaster or render. The bead consists of two plaster stop beads joined with a white extrusion allowing for approximately 4mm of movement when installed vertically. Internal and external use.View product
A key for plastering and rendering rib-lath with its stiffening ribs provides a good key for deeper coatings of plaster or render. As well as being used for walls rib-lath can also be used for partitions and ceilings. Fixed through the rib section with galvanised nails or around the rib with galvanised staples or tying wire.View product
A key for plastering and rendering rib-lath with its stiffening ribs provides a good key for deeper coatings of plaster or render. As well as being used for walls rib-lath can also be used for partitions and ceilings. Fixed through the rib section with Stainless Steel nails or around the rib with stainless steel staples or tying wire. External use only.View product