A range of metalwork products designed to assist in the fixing of timber joists, trusses, wall plates etc. when connecting timber floor and roof systems to the main masonry structure. Supplied from pre-galvanised material as standard and also available in Stainless Steel 304 Grade Austenitic.
Long Leg Timber to Timber Hangers. Manufactured from 1.5mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixed or wrapped over supporting joists.
View productSupport of short span joists, trap hatches and in-fill timbers in roof space. Designed for fast and economical light duty applications.
Attaches trusses and rafters to wall plates to provide wind restraint. Avoids skew nailing damage and provides positive resistance to wind forces. Safe working load 2.38kN uplift.
View productMono truss shoe is designed for the support of a short span, mono or in-fill truss where the lower weight loadings are required over a standard girder truss shoe.
Used to attach and support roof truss from girder truss. Higher qualified load performance and increased hole centres to spread load over a greater area. Manufactured from 1.2mm thick material.
This glide shoe is designed to allow horizontal movement at truss bearing without affecting the overall stability of the truss whilst continuing to provide resistance to lateral and uplift forces. Secures raised tie or scissor trusses to the wall plate.
View productA nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures uniform hole positions.
Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete. For higher overall load performance.
For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur.
View product