Plaster and render bead. Designed to be used to form movement joints in plaster or render where long wall runs either have movement joints in situ or where there is a need to allow for differential or thermal movement. The bead consists of two plaster stop lengths joined by a white pvc extrusion which allows for up to 4mm of movement and which is covered by a vinyl tape which is removed after plastering or rendering. Internal use only.
Code | Size | Units | Quote |
---|---|---|---|
G10MB30 | 3.0m x 10mm | 10 Box | |
G13MB30 | 3.0m x 13mm | 10 Box | |
G16MB30 | 3.0m x 16mm | 10 Box | |
G19MB30 | 3.0m x 19mm | 10 Box |
The 108mm overall mesh wing allows for a good plaster key and resistance to cracking. Fixed by plaster or mortar dabs, grab adhesive or galvanised nails/screws with washer at maximum 600mm centres.
Beads can be cut to size as required using tin-snips and/or a hacksaw. The large diamond of the expanded metal wings provide a suitable key to prevent cracking. Avoid damage to bead and coating when trowelling.
Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.
COSHH & Health & Safety.
Contains no substances hazardous to health. The comparative rough surface finish and sharp edges of expanded metal requires care when handling manually, to avoid risk of cuts and abrasions gloves should be worn.