The return type hanger is designed for similar application to the Type S but with the advantage of a return flange (25mm as standard ) which greatly increases lateral support by giving the top flange additional resistance to pull out. We would recommend the use of TYPE R return flange hangers wherever possible for all timber to brick applications. As standard the return hanger is manufactured to suit 100mm blockwork, however any length of top flange is available to order.
| Order Code = SMH / R / width x depth i.e. SMH /R / 50x200 (100 return) | |
| Width (W) | 38, 44, 47, 50, 63, 75, 88, 91, 100, 125 & 150mm |
| Depth (D) | 100, 125, 150*, 175*, 200*, 225* & 250mm* |
| Bearing Surface (B) | 75mm |
*Please note: As standard all hangers 150mm deep and above are manufactured 10mm less to allow for regularised timber and to ensure that joist levels are maintained.
A range of Heavy Duty Joist Hangers designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pregalvanised steel to BS EN 10346 : 2009, S280. Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 3.5N/mm² and above. All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm Sheradised square twist nails.
| Timber Depth | Timber Width (mm) | ||||||||||
| ↓ | 38 | 44 | 47 | 50 | 63 | 75 | 88 | 91 | 100 | 125 | 150 |
| 100mm | 50 | 40 | 40 | 40 | 40 | 40 | 30 | 30 | 30 | - | - |
| 125mm | 45 | 40 | 40 | 40 | 40 | 30 | 30 | 30 | 20 | 15 | - |
| 150mm | 40 | 40 | 40 | 40 | 40 | 25 | 25 | 25 | 20 | 15 | 15 |
| 175mm | 30 | 30 | 30 | 30 | 30 | 20 | 20 | 20 | 20 | 15 | 10 |
| 200mm | 25 | 25 | 25 | 25 | 25 | 20 | 20 | 20 | 15 | 10 | 10 |
| 225mm | 25 | 25 | 25 | 25 | 25 | 20 | 20 | 20 | 15 | 10 | 10 |
| 250mm | 25 | 25 | 25 | 25 | 20 | 15 | 15 | 15 | 15 | 10 | 10 |
Please Note The Type ‘R’ Return Hanger is not a Restraint Hanger. Restraint Hangers are specials/ manufactured to order.
