Timber Fixings and Connectors
Our extensive selection of Timber Fixings and Connectors is primarily engineered to optimise the joint strength of timber pieces by securely fixing or connecting them together, thereby significantly improving the overall efficiency and structural integrity.
Our range of Timber Fixings and Connectors; the HJS Herringbone Joist Strut, FA Frame Anchor, HDA Holding Down Angles, PP Pallet Plates, SPA Sole Plate Anchor, SP Splice Plate, SPL Safeplate, MFS Multi-Fix Strapping, DSTC Double Sided and SSTC Single Sided Tooth Plate Connectors and SPW Square Plate Washers.
The HJS Herringbone Joist Strut serves as an exceptional alternative to timber strutting, offering a cost-effective approach to providing essential lateral support to floor joists.
This is a versatile fastening solution suitable for connecting roof timber, joist trimmings, studding, and various timber frame constructions. Its slotted design enables on-site bending to accommodate different configurations. Crafted rom 1.2m thick galvanised steel, ensuring durability.
A heavy duty general purpose angle plate manufactured from 2.0mm thick galvanised steel to BS EN 10346:2009 + G275.
A multi-purpose galvanised plate manufactured from 1mm steel, used to connect timbers without the use of nails. This product must not be used to fabricate roof trusses.
Designed for use as anchorage of timber sole plate to concrete base, but may also be used as a frame tie for fixing timber window frames. Manufactured from 0.9mm thick galvanised steel.
The Splice Plate offers an economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairing localised structural timber damage. Manufactured from 0.9mm thick steel. Must be fixed in sets of 4 per joint, minimum timber thickness of 50mm.
Secured to timber studding by use of pre-punched spikes, to protect plumbing and electrical wiring against random nailing. Manufactured from 0.9mm pre-galvanised steel.
An inexpensive perforated strip which can be easily cut or bent to provide a quick and reliable method of bracing roof trusses / diagonal strutting to floor joists holding down wallplates / suspending pipework and cables / general repairs to fencing and many other DIY jobs. Manufactured from 0.9mm thick galvanised steel.
If you are unsure which product is most suitable for your job, please call the office on 01663 736 700 to discuss your requirements.