|Code||SIZES (W x L x B x S)||UNITS|
|B610/38||38 x 608 x 50 x 184mm||10 box|
|B610/44||44 x 605 x 50 x 181mm||10 box|
|B610/47||47 x 604 x 50 x 180mm||10 box|
|B610/50||50 x 602 x 50 x 178mm||10 box|
|B610/63||63 x 596 x 50 x 172mm||10 box|
|B610/75||75 x 608 x 50 x 184mm||10 box|
|B610/88||88 x 602 x 50 x 176mm||10 box|
|B610/91||91 x 600 x 50 x 174mm||10 box|
|B610/100||100 x 596 x 50 x 172mm||10 box|
|B610/125||125 x 608 x 50 x 184mm||10 box|
|B610/150||150 x 596 x 50 x 172mm||10 box|
Manufactured from 1.5mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixed or wrapped over supporting joists. For loft conversion applications where the hanger extends below the supporting beam, a maximum drop of 75mm is recommended. Design features a location tab on the hanger base, designed to allow quick and accurate alignment of the hanger.
Produced from galvanised steel to BS EN 10346:2009 DX51D + G275 as standard, or stainless steel available to order.
Fix using either Type A or Type B fixings in all pre-punched holes:
• Type A, 30mm x 3.75mm Sheradised Square Twist Nails usually supplied loose for manual fixing.
• Type B, 35mm x 3.75mm Sheradised Square Twist Nails usually collated for nail gun fixing.