Further information
| Code | SIZES (W x L) | UNITS |
| NP/50×150 | 50mm x 150mm | 250 box |
| NP/80×150 | 80mm x 150mm | 250 box |
| NP/80×200 | 80mm x 200mm | 200 box |
| NP/80×250 | 80mm x 250mm | 100 box |
| NP/80×300 | 80mm x 300mm | 100 box |
| NP/80×350 | 80mm x 350mm | 100 box |
| NP/80×400 | 80mm x 400mm | 100 box |
| NP/100×150 | 100mm x 150mm | 250 box |
| NP/100×200 | 100mm x 200mm | 100 box |
| NP/100×250 | 100mm x 250mm | 100 box |
| NP/100×300 | 100mm x 300mm | 100 box |
| NP/100×350 | 100mm x 350mm | 100 box |
| NP/100×400 | 100mm x 400mm | 100 box |
| NP/150×200 | 150mm x 200mm | 100 box |
| NP/150×250 | 150mm x 250mm | 100 box |
| NP/150×300 | 150mm x 300mm | 100 box |
| NP/150×350 | 150mm x 350mm | 100 box |
| NP/150×400 | 150mm x 400mm | 50 box |
| NP/200×200 | 200mm x 200mm | 25 box |
| NP/200×250 | 200mm x 250mm | 25 box |
| NP/200×300 | 200mm x 300mm | 25 box |
| NP/200×350 | 200mm x 350mm | 25 box |
| NP/200×400 | 200mm x 400mm | 25 box |
A cost effective method of jointing structural timbers (such as site built trusses) simply by nailing through the pre-punched holes. Manufactured from 0.9mm thick galvanised steel to BS EN 10346:2009 + G275. The pressed dimple design adds strength and rigidity to the component whilst also assisting in the location of nails. Fix using BPC Sheradised Square Twisted Nails 30mm x3.75mm. Plates must be fixed on both sides of the timber.