SSERSB Stainless Steel External Render (Bell) Bead (SERS)

External bead. Used where a neat drip or ‘bell-end’ lower edge is needed on external render. Fixed by mortar dabs or stainless steel nails.

Downloads

Datasheet
Code Size Units Quote
SSERSB30 3.0m x 22mm 50 Box

The 53mm mesh wings allow for a good render key and resistance to cracking. Fixed by mortar dabs, grab adhesive or stainless steel nails/screws with washer at maximum 600mm centres. External use only. The large diamond of the expanded metal wings provide a suitable key to prevent cracking.

Beads can be cut to size as required using tin-snips and/or a hacksaw.

  • Standard: BS EN13658-2:2005
  • Material: Stainless steel grade 1.4016
  • Material gauge: 0.4mm
  • Reaction to fire: Class A1

Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.

COSHH & Health & Safety.

Contains no substances hazardous to health. The comparative rough surface finish and sharp edges of expanded metal requires care when handling manually, to avoid risk of cuts and abrasions gloves should be worn.

Successfully added {{filename}} to your quote list