Get in Touch

SLHDR Security Lath Heavy Duty Raised

This heavy duty raised Security Lath is ideal for internal or external brickwork and can act as a key for render or plaster finishes when galvanised.

Downloads

Datasheet
Code Size Quote
SLHDR 2440mm x 1200mm x 3.0mm

Long wire aperture = 50.08mm, short wire aperture = 22.58mm, wire width = 3.12mm, wire thickness = 3mm, weight = 6.52kg/m²

Features

  • Low Profile mesh ideal for use between plasterboard and structural studs or joists to improve resistance to attack.
  • Diamond shape restricts the use of hand tools for Cutting.
  • Strands are rolled flat for uniform thickness.
  • Continuous mesh manufactured form a single sheet eliminates broken or weak joints.
  • Mild Steel – Hot Rolled to BS EN 10111
  • Mild Steel – Hot Dip Galvanised to BS EN 1461

Installation

  • Fix at maximum 450mm centres to supporting structures.
  • Timber stud: use 38mm galvanised staples, screws or nails with a 25mm washer.
  • Metal stud: use 30mm self-tapping screws with a 25mm washer.
  • Brickwork: use 50mm screw and plug with a 25mm washer.

Goods to be stored and transported laying down and in dry conditions. Please dispose or recycle in accordance with waste management regulations.

COSHH & Health & Safety.

Contains no substances hazardous to health. SLHDR Security Lath is manufactured from sheared plate and strip so may contain sharp edges. Suitable personal protection should always be used when handling/installing these products.

Request Quote

Successfully added {{filename}} to your quote list