A range of wall tie products specifically designed to secure wall skins and framework together to provide structural integrity through various forms of movement and force. A wide-ranging choice of ties and fixings has been developed to provide the maximum performance for any combination of materials used on a project.
NEUTRAS wall ties have both low thermal conductivity and high structural performance levels. This means they can be excluded from the current U value calculations in EN ISO 6946 and provide a credible solution to new legislation requirements. Available as Type 4 (Housing Tie) Type 2 (General Purpose Tie) and Type 1 (Heavy Duty Tie)
Used in full fill cavities or where the prevention of moisture travelling across the cavity is not an issue. Also for collar jointed walls. Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1
Drip feature to prevent moisture travelling across the cavity (taking less space than vertical twist). Tested as Type B (sound) Tested as Type 1 (strength) to BS EN 845-1. Drip position 90mm from safety end as standard.
Traditional Double Triangle wall tie previously to BS1243. Multidrip feature to prevent moisture travelling across the cavity. Design means the tie can be installed either way up. Tested as Type B (sound) Tested as Type 2 & 3* (strength) to BS EN 845-1
As a result of problems experienced over wider cavities (150mm to 300mm) and their weight causing long ties to overturn, the Vista two part tie allows larger cavities to be spanned, (up to BS EN 845 – 1 standard for a type 2 tie). The shorter section is built into the inner leaf as construction proceeds, whilst the longer section is locked into the inner section and built into the outer leaf as it lifts. Tested as Type B (sound) Tested as Type 2 (strength) to BS EN 845-1