EN2 General Purpose Wall Ties - Vista Engineering

BBA Approved general purpose wall ties (Agrément Certificate: 17/5462).
Application – A general-purpose wall tie for applications such as small commercial buildings and domestic properties. They are suitable for buildings with a maximum height if 15m and for flat sites where the basic wind speed is up to 31m/s and altitude is not greater than 150m above sea level.
Design – Multidrip feature to prevent moisture travelling across the cavity, it can be installed either way up.
Material – Manufactured from grade 304 stainless steel.
Behaviour in relation to fire – Non combustible (as defined in the national Building Regulations).
Durability – Excellent corrosion resistance and a service life of not less than 60 years.
Thermal performance – In situations where thermal losses through ties need to be taken into account, the products will adequately resist thermal transmittance through a wall cavity.
Compliance – Tested as Type B (sound) and as Type 2 (strength) to BS EN 845-1.
Specification – Available for specification on the NBS Source platform.

Data Sheet